Solus 26W 2 PIN G24D-3 Fluorescent Stick
Login or register to see price
Availability:
In stock
SKU
015201
PLD-26W-4000K-G24d-2(2 PIN）
Product Description
| Rated wattage (0.1 W precision) |
26W |
| Rated luminous flux |
1800 |
| Equivalence incandescent wattage |
/ |
| Rated wattage (0.1 W precision) | 26 |
|---|---|
| Rated luminous flux | 1800 |
| A warning if lamp cannot be dimmed | N |
| Equivalence incandescent wattage | / |
| Rated lamp life time | 15000 |
| No. of switching cycles | / |
| Lamp power factor | 0.1 |
| Colour temperature | 4000K |
| Colour rendering | >82 |
| Warm up time up to 60%of the full light output (may indicate as "instant light" if less than 1 second) | / |
| Starting time (as X.X seconds) | ≤10s |
| Lamp dimensions in mm | 265*163 |
| Lamp mercury content in X.X mg | 2.2 |
| If designed for use in non standard conditions information to be supplied | / |
| Weight | .0630 |
| Case Size | 10 |
| Packs | 10 |
| Applicable Dangerous Goods Regulations | Not Applicable |
| Product Features | Up to 80% energy saving on traditional incandescent lamps. The latest generation CFLs switch on and reach full brightness much quicker than previous versions. If instant light is required use new halogen bulbs. Last up to 10 times as long as an incandescent lamp |
|---|---|
| Rated lamp life time | 10000H |
| No. of switching cycles | 10000X |
| Lamp power factor | 0.5 |
| Colour temperature | 2700K |
| Colour rendering | >80 |
| Warm up time up to 60%of the full light output (may indicate as "instant light" if less than 1 second) | 120sec |
| A warning if lamp cannot be dimmed | N |
| If designed for use in non standard conditions information to be supplied | NO |
| Lamp dimensions in mm | 38x113 |
| Lamp mercury content in X.X mg | 3.5mg |
| Lumen maintenance factor at the end of nominal life | ≥70% |
| Starting time (as X.X seconds) | 2.0 |
| Conumer unit pack size | 1pk |
| Number of packs per outer case | 10pks |
| Packaging and the Environment | Solus cares for the environment. For this reason the blister-packs are produced in such a way that the component parts (cardboard and PVC) can be separated in favour of differential refuse collection and recycling. |